Zone Merge-Control Restrict Vsan - Cisco MDS 9124 - Fabric Switch Reference

Chapter 27 Z Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

zone merge-control restrict vsan

To restrict zone database merging, use the zone merge-control restrict vsan command in configuration
mode. To disable this feature, use the no form of the command.
Syntax Description
vsan-id
Defaults Disabled.
Command Modes Configuration mode.
Command History Release
2.0(x)
Usage Guidelines If merge control setting is restricted and the two databases are not identical, the ISLs between the
switches are isolated.
Examples
The following example shows how to configure zone merge control.
switch# config terminal
switch(config)# zone merge-control restrict vsan 10
Related Commands Command
show zone
OL-16217-01, Cisco MDS SAN-OS Release 3.x
zone merge-control restrict vsan vsan-id
no zone merge-control restrict vsan vsan-id
Specifies the VSAN ID. The range is 1 to 4093.
Modification
This command was introduced.
Description
Displays zone information.
zone merge-control restrict vsan
Cisco MDS 9000 Family Command Reference
27-11