Zone Name (Configuration Mode) - Cisco MDS 9124 - Fabric Switch Reference

Chapter 27 Z Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

zone name (configuration mode)

To create a zone, use the zone name command in configuration mode. Use the no form of the command
to negate the command or revert to the factory defaults.
Note On a Cisco Fabric Switch for HP c-Class BladeSystem and on a Cisco Fabric Switch for IBM
BladeCenter, the syntax differs as follows:
interface {bay port | ext port}
Syntax Description
zone-name
vsan vsan-id
attribute
read-only
broadcast
qos priority {high | low |
medium}
attribute-group group-name
member
device-alias alias-name
lun lun-id
domain-id domain-id
OL-16217-01, Cisco MDS SAN-OS Release 3.x
zone name zone-name vsan vsan-id
attribute {broadcast | qos priority {high | low | medium} | read-only}
attribute-group group-name
member {device-alias alias-name [lun lun-id] |
domain-id domain-id port-number port-number |
fcalias name | fcid fcid-value [lun lun-id] | fwwn fwwn-id |
interface fc slot/port [domain-id domain-id | swwn swwn-id] |
ip-address ip-address [subnet-mask] | pwwn pwwn-id [lun lun-id] |
symbolic-nodename identifier}
zone name zone-name vsan vsan-id
no attribute {broadcast | qos priority {high | low | medium} | read-only}
no attribute-group group-name
no member {device-alias alias-name [lun lun-id] |
domain-id domain-id port-number port-number |
fcalias name | fcid fcid-value [lun lun-id] | fwwn fwwn-id |
interface fc slot/port [domain-id domain-id | swwn swwn-id] |
ip-address ip-address [subnet-mask] | pwwn pwwn-id [lun lun-id] |
symbolic-nodename identifier}
no zone name zone-name vsan vsan-id
Specifies the name of the zone. Maximum length is 64 characters.
Specifies the VSAN ID. The range is 1 to 4093.
(Optional) Sets zone attributes.
Sets read-only attribute for the zone (default is read-write).
Sets broadcast attribute for the zone.
Sets QoS attribute for the zone (default is low).
Configures an attribute group. Maximum length is 64 characters.
(Optional) Adds a member to a zone.
Adds a member using the device alias name.
Specifies the LUN number in hexadecimal format.
Adds a member using the domain ID.
Cisco MDS 9000 Family Command Reference
zone name (configuration mode)
27-13