Managing Profiles - Oki MPS4200mb Basic User Manual

Enter the information in C-2.
12
Note
If domain management is done, enter "C-2@domain
name".
When carrying out domain management, if you cannot
connect even after entering "C-2@Domainname",
delete "@Domainname".
Access the machine's website again, and set the
NetBIOS domain name in [Workgroup name] within
[Admin Setup] > [Network Menu] > [NBT/
NetBEUI].
*For the domain name, please check with the network
manager.
Select [Enter] and then press
13
Press the to select [Password] and
14
then press .
OK
Enter the value of C-3.
15
Select [Enter] and then press
16
Press the to select [File Name] and
17
then press .
OK
Enter the information in C-6.
18
- By adding "#n" to the end of the file name, a
serial number is automatically assigned to the end
of the name of sent files.
- By adding "#d" to the end of the file name, a date
is automatically assigned to the end of the name
of sent files.
Select [Enter] and then press
19
Configure other items if necessary.
20
Press to register the settings.
21
OK
The setup for Scan To Network PC is complete.
Reference
For details how to use Scan To Network PC, refer to
to Network PC" P. 104.

Managing Profiles

To perform the Scan To Network PC, Auto Deliver
or Transmission Data Save function (for MB491/
ES4191 MFP Only), a profile for each destination
must be created. You can register up to 50
profiles.
Reference
Refer to "Creating a Profile for Scan To Network PC" P. 70
Modifying a Profile
Press the <SETTING> key on the
1
operator panel.
Press the
2
press
Press the
3
want to modify and then press
Press the
4
. press
OK
Press the
5
to modify and then press
Modify the item.
6
.
Select [Enter] and then press
7
OK
If you want to modify more than one
8
item, repeat steps 5 and 7.
Press
9
Deleting a Profile
Press the <SETTING> key on the
1
operator panel.
. Press the
2
OK
press
Press the
3
want to delete and then press
Press the
4
press
Press the
5
confirmation message and then press
"Scan
- 71 -
Configuring the Network Settings
to select [Profile] and then
.
OK
to select the profile you
to select [Edit] and then
.
OK
to select the item you want
OK
to register the settings.
OK
to select [Profile] and then
.
OK
to select the profile you
to select [Delete] and then
.
OK
or to select [Yes] on the
1
.
OK
.
.
OK
.
OK
.
OK