Scan To Local Pc - Oki MPS4200mb Basic User Manual

Scan to Local PC

You can save the scanned data into your local computer.
When you press the
M
ONO
job starts and the ActKey utility and the TWAIN
driver start automatically. You can send the
scanned document to a specified application,
save it in a specified folder, or send it by fax.
In the WSD Scan connection, you can set an
application to start and a location where you
send or store document for each recipient.
The machine can be connected to USB interface
or network, but only a computer can be
connected at the same time.
If the Mac OS X is running, the image capture
and the ICA driver start up automatically.
You can select a folder and save the scanned
documents in it.
Note
Connect the machine to a computer via USB or a network.
Install ActKey and scanner driver before scanning to a
local computer.
If you conect the machine to network, follow these
instructions.
- Set [TCP/IP] setting to [Enable].
- Conform the IP version of the machine to that of your
computer.
- Set up the DNS server.
- Enable the network TWAIN setting.
If the Mac OS X is running, you can scan a document in
the fixed A4 size only on the document glass.
If the Mac OS X 10.7 is running and if you scan documents
through network connection, you need to start the image
capture first. Then, you need to select the machine from
the list displayed at the left of image capture screen.
To use the MFP in WSD Scan connection, set the followings.
- Set the [TCP/IP] setting of the MFP to [Enable].
- Match the IP version between the MFP and the PC.
- Enable the WSD Scan.
- Install the MFP on the PC.
Reference
For details on how to enable the network TWAIN setting,
refer to the User's Manual Advanced.
For details on how to install the ActKey utility, refer to the
User's Manual Advanced.
For the procedure to enable WSD Scan, see the "User's
Manual, Applications."
For the procedure to install the MFP on the PC, see
to use the WSD Scan" P. 101.
Connecting via USB
Press the <SCAN> key on the operator panel.
1
Place your document with text face up in the
2
ADF or face down on the document glass.
or , the scan
C
OLOR
"Setup
- 105 -
Press the to select [Local PC] and
3
then press .
OK
If the Network TWAIN setting is set to [Disable],
proceed to the step 6.
Check that [Select A Connecting PC] is
4
selected and then press
Press the to select [From USB
5
Interface] and then press
Press the to select [Select An
6
Application] and then press
Press the to select where to send the
7
scanned document and then press
Selectable location Values to send:
Application
Note
If the Mac OS X is running, you can select Folder only.
Press or
8
M
ONO
Memo
If you select [Application], the specified application starts
and the scanned image is displayed on the application.
If you select [Folder], the scanned image is saved in the
specified folder.
If you select [PC-FAX], the application for fax
transmission starts. After sending the scanned image,
send a fax with the fax transmission software on your
computer.
Connecting via Network
Press the <SCAN> key on the operator panel.
1
Place your document with text face up in the
2
ADF or face down on the document glass.
Press the to select [Local PC] and
3
then press .
OK
Check that select [Select A Connecting
4
PC] is selected and then press
Check that [From Network] is selected
5
and then press
OK
Press the to select the computer you
6
want and then press
Scanning Methods
.
OK
.
OK
.
OK
.
OK
Folder PC-FAX
.
C
OLOR
.
OK
.
.
OK
4