Usb Connection - Oki MPS4200mb Basic User Manual

Check that the name of your machine is
15
displayed in [Printer List], and then
close the window.
From the [Go] menu, select
16
[Applications] > [TextEdit].
Select the [File] menu > [Page setup].
17
Select the name of your machine from
18
[Format for].
Check that [OKI MB491(PS)] or [OKI
19
MB491(PCL)] is displayed correctly
under [Format for].
Click [OK].
20
Remove "Software DVD-ROM" from the
21
computer.
The installation is complete.

USB Connection

Perform the following procedure to connect your
machine to a computer via USB.
Connecting a USB Cable
Prepare a USB cable.
1
A USB cable is not supplied with your machine.
Prepare an USB 2.0 cable separately.
Memo
Use a USB 2.0 Hi-Speed cable for a USB 2.0 Hi-Speed
connection.
Hold down the power switch for about a
2
second to turn on the power and the
computer.
Reference
"Turning Off Your Machine" P. 20
Plug one end of the USB cable into the
3
USB interface connector on the back of
the machine.
Plug the other end of the USB cable into
4
the computer's USB interface connector.
Note
For Windows OSs, do not plug the other end of the
USB cable into the computer until prompted during
driver installation.
Note
Do not plug the USB cable into the network interface
connection. Doing so may damage your machine.
- 55 -
Connecting to a Computer
2
1