Paper Recommendations; Storing Paper - Oki MPS4200mb Basic User Manual

Mb461/471/491/mps4200mb user guide
Hide thumbs Also See for MPS4200mb:
Table of Contents

Advertisement

Paper Recommendations

Your MFP will handle a variety of print media,
including a range of paper weights and sizes.
This section provides general advice on choice of
media, and explains how to use each type.
The best performance will be obtained when
using standard 75~90g/m
use in copiers and laser printers.
Use of heavily embossed or very rough textured
paper is not recommended.
Pre-printed stationery can be used, but the
ink must not offset when exposed to the high
fuser temperatures used in the printing process.
Envelopes
Envelopes should be free from twist, curl or other
deformations.
They should also be of the rectangular flap type,
with glue that remains intact when subjected to
hot roll pressure fusing used in this type of
printer. Window envelopes are not suitable.
Labels
Labels should also be of the type recommended
for use in copiers and laser printers, in which the
base carrier page is entirely covered by labels.
Other types of label stock may damage the
printer due to the labels peeling off during the
printing process.
2
paper designed for
- 31 -
Loading Paper and Documents

Storing Paper

Store paper in the following conditions to
maintain quality:
Inside a cabinet or other dry and dark place
On a flat surface
Temperature: 20°C
Humidity: 50% RH (relative humidity)
Avoid placing:
Directly on the floor
In the direct sunlight
Near the inside of an exterior wall
On an uneven surface
Where static electricity may be generated
Where temperature rapidly changes
Near a printer, air conditioner, heater, or duct
Note
Do not unwrap the paper until you are ready to use the
paper.
Do not leave paper unwrapped for a long period. Doing so
may result in paper handling and print quality issues.
1

Advertisement

Table of Contents
loading

This manual is also suitable for:

Es4161 mfpEs4191 mfpMb491+Mb491mfpMb461mfpMb471mfp

Table of Contents