Oki MPS4200mb Basic User Manual page 23

Printer Driver Configuration
Note
You must be logged in as an administrator to complete this
procedure.
If the following conditions are met for Mac OS X, it is not
necessary to configure the printer driver, as the configured
option information is automatically taken from the
machine.
- USB connection
- When options have been configured on the machine
prior to installing the driver, where there is a connection
to a network using EtherTalk
Windows PCL XPS printer driver is not available for
Windows Vista, Windows Server 2008, Windows Server
2003, and Windows XP.
Reference
The printer driver needs to be installed on the computer
before doing this procedure. For details on how to install the
printer driver, refer to "Connecting to a Computer" P.
For Windows PCL/PCL XPS Driver
Click [Start] > [Devices and Printers].
1
Right-click the OKI MB491 icon and
2
select [Printer properties]. (If you
have installed multiple printer drivers,
select [Printer properties] >[OKI
MB491(PCL)] or [OKI MB491(PCL
XPS)]).
Select the [Device Options] tab.
3
For the network connection, select [Get
4
Printer Settings].
For the USB connection, check [Lower Cassette].
Click [OK].
5
For Windows PS Driver
Click [Start] > [Devices and Printers].
1
Right-click the [OKI MB491(PS)] icon
2
and then select [Printer properties].
(If you have installed multiple printer
drivers, select [Printer properties] >
[OKI MB491(PS)].)
Select the [Device Settings] tab.
3
For the network connection, select [Get
4
installed options automatically]
under [Installable Options], and then
click [Setup].
For the USB connection, select [Installed] for
[Second tray] under [Installable Options].
46.
Click [OK].
5
For Mac OS X PCL/PS Driver
(Mac OS X 10.5 to 10.7)
Select [System Preferences] from the
1
Apple menu.
Click [Print & Scan] (For Mac OS X 10.5
2
and 10.6:[Print & Fax]).
Select the name of your machine and
3
then click [Options & Supplies].
Select the [Driver] tab.
4
- 23 -
Installing Options
1