Installing A Printer Driver - Oki MPS4200mb Basic User Manual

Connecting to a Computer

Installing a Printer Driver

(For Mac OS X)
To complete the network connection with a Mac
operating system, install a printer driver on the
computer and set your machine as a network
printer.
Select the protocol for your network connection
from the following:
EtherTalk
Bonjour
Note
EtherTalk is not supported in Mac OS X 10.6 or later.
Disable the anti-virus software before starting this
procedure.
EtherTalk is not supported in Mac PCL.
Using EtherTalk (For Mac OS X
10.5)
When connecting to the network with EtherTalk,
it is necessary to enable EtherTalk in the
machine. Then, install the driver in the computer.
First, enable EtherTalk in the machine.
Ensure that your machine and the
1
computer are turned on and connected.
Reference
"Connecting an Ethernet Cable" P. 47
Press the <SETTING> key on the
2
operator panel.
Press the to select [Admin Setup],
3
and press .
OK
Enter the administrator password.
4
The factory default password is "aaaaaa".
Select [Complete], and press
5
Press the to select [Network Menu],
6
and press .
OK
Press the to select [Network Setup],
7
and press .
OK
Press the to select [EtherTalk], and
8
press .
OK
Press the to select [Enable], and
9
press .
OK
Press the until the top screen is
10
displayed.
Next, install the driver in the computer.
Insert the "Software DVD-ROM" into the
1
computer.
Double-click the [OKI] icon on the
2
desktop.
Double-click [Driver] > [Printer] >
3
[Installer for MacOSX].
Enter the administrator's password, and
4
then click [OK].
Follow the instructions displayed on the screen to
complete the installation.
From the Apple menu, select [System
5
Preferences].
Click [Print & Fax].
6
Click [+].
7
Click [AppleTalk].
8
.
OK
- 50 -