Table of Contents
Advertisement
M
ANAGING PROFILES
C
REATING A PROFILE FOR
Register the information you configured on the computer as a profile. It is necessary when
you perform Scan To Shared Folder with the computer.
1.
Press the SETTING button on the control panel to prompt the Setting screen.
2.
Using the Down arrow key, scroll to Profile and press OK.
3.
Select the desired profile number.
4.
Press the Right arrow key to prompt the Operation Menu screen.
From here you can register or sort profiles.
5.
When registering a new profile, press the Right arrow key to prompt the Profile
screen.
6.
Ensure Profile Name: is highlighted then press the Right arrow key.
7.
Using the arrow keys and on-screen keypad, enter the information in C-4.
NOTE
MC562dn/MC562w/MC562dw/ES5462 MFP/ES5462dw MFP/MPS2731mc only:
You can also use the qwerty keyboard to enter details.
8.
Using the arrow keys, highlight Enter and press OK.
9.
Using the Down arrow key, scroll to Target URL then press the Right arrow key.
10.
Using the arrow keys and on-screen keypad, enter the name of the destination
computer (C-1) and the shared folder name (C-5) as "\\name of the
destination computer\shared folder name".
11.
Using the arrow keys, highlight Enter and press OK.
12.
Using the Down arrow key, scroll to User Name then press the Right arrow key.
13.
Using the arrow keys and on-screen keypad, enter a suitable user name (C-2).
NOTE
If domain management is done, enter "
14.
Using the arrow keys, highlight Enter and press OK.
15.
Using the Down arrow key, scroll to Password then press the Right arrow key.
16.
Using the arrow keys and on-screen keypad, enter a suitable password (C-3).
17.
Using the arrow keys, highlight Enter and press OK.
18.
Using the Down arrow key, scroll to File Name then press the Right arrow key.
19.
Using the arrow keys and on-screen keypad, enter a suitable file name (C-6).
NOTE
You can enter up to 64 characters.
By adding "#n" to the end of the file name, a serial number is automatically
assigned to the end of the name of sent files.
By adding "#d" to the end of the file name, a date is automatically assigned
to the end of the name of sent files.
20.
Using the arrow keys, highlight Enter and press OK.
S
S
F
CAN TO
HARED
OLDER
Configuring the network settings > 35
user name
@domain name".
Advertisement
Table of Contents
