Installing Your Machine; Unpacking Your Machine - Oki MPS4200mb Basic User Manual

Installing Your Machine

This section explains how to unpack your machine and how to turn it on and off.

Unpacking Your Machine

Note
The image drum (the green tube) is very delicate. Handle
it carefully.
Do not expose the image drum to direct sunlight or very
bright interior light (approximately more than 1500lux).
Even under the normal interior light, do not leave it for
more than 5 minutes.
Packaging and cushioning material is required at the time
of shipping the machine. Please keep it as you will need it
should you wish to transport the machine at some point in
the future.
Remove your machine from the box and
1
remove cushioning materials and the
plastic bag from your machine.
The accessories are packed within the cushioning
material (1).
1
Lift your machine and place it where it is
2
to be installed.
Note
Do not open the scanner unit till the procedure no.9 is
completed.
Remove the protection tapes (2) at the
3
top and sides of your machine to take
out cushioning materials (3).
Remove the protection tapes (4) to open
4
the MP tray.
4
Remove the protection tape (5) to pull
5
the paper up.
Close the MP tray.
6
- 17 -
Installing Your Machine
3
2
5
1