Paper Output; Documents; Document Requirements - Oki MPS4200mb Basic User Manual

Paper Output

Your machine outputs to the facedown or faceup
stacker. Paper types that can be outputted to
each stacker are as follows.
Output Supported
Stacker paper type
Facedown Standard
Recycled
paper
When performing duplex printing, paper outputs
to the facedown stacker.
Note
Do not open or close the faceup stacker while printing as it
may result in a paper jam.
Using the Facedown Stacker
Delivers paper with the print side face down.
Note
Check that the faceup stacker on the rear side of the
machine is closed. If the faceup stacker is open, paper is
always outputted to the faceup stacker.
Using the Faceup Stacker
Delivers paper with the print side face up.
Note
The faceup stacker is not available in duplex printing.
Paper output
capacity
150 sheets (when
paper weight is less
2
than 80 g/m )
- 37 -
Loading Paper and Documents
Pull the faceup stacker on the rear side
1
of the machine and open it toward you.
Unfold the faceup stacker.
2

Documents

You can use the auto document feeder (ADF) or
the document glass to load documents for
copying, scanning or faxing.

Document Requirements

You cannot load the following documents on the
ADF. Use the document glass instead:
Torn or perforated paper
Curled or rolled paper
Wet paper
Static paper
Carbon-backed paper
Fabrics, metallic sheets or Transparency films
Paper with staples, paper clips, ribbons, or tape
Pasted paper, paper with glue
Glossy paper
Specially coated paper
Keep the followings in mind to avoid damaging
the document glass:
Do not hold a document firmly on the glass when
copying a thick document.
Place hard documents gently.
Avoid loading documents with sharp projections.
1