Oki MB451wMFP User Manual page 62

Connecting to a Computer
Click [+].
8
Note
 If the machine is already shown in [Printers], select
your machine, and click on [-] to delete. After this,
click [+].
Select the name of your machine whose
9
[Connection] is [USB], and then check
that [OKI MB491(PS)] or [OKI
MB491(PCL)] is displayed in [Print
Using].
Click [Add].
10
Check that the name of your machine is
11
displayed in [Printers] and [OKI
MB491(PS)] or [OKI MB491(PCL)] is
displayed.
Note
 If [OKI MB491(PS)] or [OKI MB491(PCL)] is not
correctly displayed, click [-] to remove your machine
from [Printers] and then redo the procedure from
steps 8 to 10.
Close [Print & Scan](Mac OS X 10.5
12
and 10.6:[Print & Fax]).
Remove "Software DVD-ROM" from the
13
computer.
The installation is complete.
 For Mac OS X 10.4.0 to 10.4.11
Memo
 The procedure below uses Mac OS X 10.4.11 as an
example. Depending on your OS, the description may be
different.
Ensure that your machine and the
1
computer are turned on and connected.
Reference
"Connecting a USB Cable" P. 59

Insert "Software DVD-ROM".
2
Double-click the [OKI] icon on the
3
desktop.
Double-click [Driver] folder > [PS] or
4
[PCL] folder > [Installer for Mac OS
X].
Enter the administrator password, and
5
then click [OK].
Follow the instructions displayed on the screen to
complete the installation.
From the [Go] menu, select [Utilities],
6
and then double-click [Printer Setup
Utility].
Note
 If [Printer Setup Utility] is already running, close it
and open it again.
Click [Add].
7
If the [You have no printers available] dialog
box appears, click [Add].
Note
 If the name of your machine whose [connection] is
[USB] is already displayed, select it and click
[Delete], and then click [Add].
- 62 -