Copying; Basic Operation; Starting A Copy Job; Canceling A Copy Job In Progress - Oki MB451wMFP User Manual

2. Copying

This chapter explains the basic operation and settings for your machine's copy function.

Basic Operation


This section explains how to start and cancel copy jobs.

Starting a Copy Job

Press the <COPY> key on the operator
1
panel to open the copy standby screen.
Place your document with text face up in
2
the ADF or face down on the document
glass.
Configure the copy settings if necessary.
3
Enter the number of copies using the
4
ten-key pad.
- You can enter up 1 to 99 sets.
- If you have entered an incorrect value, press the
<CLEAR> key and then enter the correct value.
Press to start copying.
5
M
ONO
Reference
 For details on how to configure each copy setting, refer to
"Configuring Copy Settings" P.
 For details on how to load your documents in the ADF or on
the document glass, refer to
79.
"Loading Documents" P. 38.
Canceling a Copy Job in
Progress
You can cancel copying until the message
showing the copy completion is displayed.
Press the <STOP> key on the operator
1
panel.
Note
 When you make a copy with the document glass, do not
apply an excessive load to the document glass.
- 78 -