Setting Up Scan To Network Pc - Oki MB451wMFP User Manual

Select [Enter] and then press
7
Press the and then enter the
8
information in B-1.
Select [Enter] and then press
9
Press the and then select a protocol
10
for receiving e-mail for the machine, and
then press .
OK
- If you want your machine to receive e-mail from
the POP3 server, select [POP3]. Proceed to step
11.
- If you want your machine to receive e-mail
without using a mail server, select [SMTP].
Proceed to step 13.
- If you do not want your machine to receive e-mail,
select [Disable]. Proceed to step 13.
Press the and then enter the
11
information in B-3.
Select [Enter] and then press
12
Press the and then select an
13
authentication method based on the
information in B-4. Then, press
- If B-4 is "Do not authenticate", select [Do not
authenticate]. Proceed to step 24.
- If B-4 is "SMTP", select [SMTP Auth]. Proceed to
step 14.
- If B-4 is "POP", select [POP Before SMTP].
Proceed to step 18.
Press the and then enter the
14
information in B-5.
Select [Enter] and then press
15
Press the and then enter the
16
information in B-6.
Select [Enter] and then press
17
Proceed to step 24.
Press the and then enter the
18
information in B-3.
Select [Enter] and then press
19
Press the and then enter the
20
information in B-7.
Select [Enter] and then press
21
Press the and then enter the
22
information in B-8.
Select [Enter] and then press
23
. When the setup menu screen is
24
OK
displayed, press
.
OK
The setup for Scan To E-mail, Scan To Fax Server
and Internet Fax is complete.
Reference
 For details on how to use Scan To E-mail, refer to
E-mail" P.
 For details on how to use Scan To Fax Server, refer to
"Basic Procedure for Scan To Fax Server" P.
 For details on how to use Internet Fax, refer to
Procedure for Internet Faxing" P.
Setting Up Scan To Network
PC
.
OK
The Scan To Network PC function enables you to
send and save scanned images to the "shared
folder" of a computer on the network. To use this
.
function, register your machine on the computer
OK
as a user and create a shared folder, and then
create a profile on your machine to register the
settings for the computer.
Note
 Before starting the setup, get permission from the network
administrator to create a shared folder on the computer by
following the procedure below.
Memo
 The CIFS protocol is used in this procedure.
.
OK
Checking the Name of the Computer
Check the name of the computer following the
.
procedure below, and fill in C-1 of the Setup
OK
Information Form.
 For Windows 7, Windows Server
2008 R2, Windows Server 2008
and Vista
.
OK
Click [Start] and select [Control
1
Panel].
Select [System and Security].
2
.
OK
For Windows Server 2008 and Windows Vista,
select [System and Maintenance].
.
OK
- 67 -
Configuring the Network Settings
.
OK
107.
98.
1
"Scan to
96.
"Basic