Oki MB451wMFP User Manual page 35

Insert the paper with the print side face
5
up until its edge touches the paper feed
entrance.
Note
 Do not load paper above the fill line (1).
1
Press the Set button (2).
6
Register the loaded paper on your machine.
Proceed to "Configuring the Tray
Note
 Do not load paper of different sizes, types or weights at
the same time.
 When adding paper, remove the paper in the MP tray and
straighten the edges of both stacks of paper, and then load
them again.
 Do not put anything other than paper for printing.
Memo
 When loading envelopes in the MP tray, load them face up
with the orientation as stated below.
- Your envelopes (Monarch, Com-9, Com-10, DL and C5)
are loaded with the flap folded and the flap should come
to the right side to the feeding direction.
 Loading Paper in the Manual
The following procedure explains how to load
paper in the Manual Feeder.
1
2
2
3
Settings".
 Only one sheet can be set in the Manual Feeder each time.
 The machine will not load paper when it is in the sleep
- 35 -
Loading Paper and Documents
Feeder (MB441/MB461/ES4161
MFP)
Open the Manual Feeder.
Adjust the manual feeding paper guide to
the width of paper to be loaded.
Load a paper.
Note
mode or power save mode. If it is in either mode when you
use the manual feeder, press the <POWER SAVE> key on
the operator panel. Then it goes to the standby mode.
After that, load paper.
1