Copying Issues - Oki MB451wMFP User Manual

Copying Issues

Memo
 If the following information does not solve your trouble, contact your dealer.
Unable to Copy
Symptom
Unable to copy.
Point to check
Is the machine turned on?
Is the machine initializing?
Is your document properly loaded
on the machine?
Is there paper in the tray?
Is the proper size of paper for your
document loaded in the tray?
Is the paper tray selectable when
[Paper Feed] is set to [Auto]?
Is the loaded paper compatible
with duplex printing?
Is the media type of the paper tray
set to [Plain] or [Recycled]?
Is there a paper jam?
Is there an empty toner cartridge? Replace it with a new toner
Is the image drum at the end of its
life?
Are any covers on the machine
open?
Is an error occurring?
Is another job in progress?
Is a print job from a computer or
other device in progress?
Is a fax being transmitted in real
time?
Remedy
Hold down the power switch for
about a second to turn on the
power.
Wait until initializing is done.
Load the document properly on the
machine.
Load paper in the tray.
Or, check that the paper cassette is
installed on the machine.
Load the proper size of paper for
your document.
Press the <SETTING> key and
select [Paper Setup] > [Select
Tray] > [Copy] > the paper tray
on which the paper you use is
loaded, and then select [ON] or
[ON(Prior)].
Duplex copying cannot be done
without the proper paper size,
document type, or document
weight.
Load the right paper for duplex
printing and configure the paper
size, document type, and
document weight correctly.
When setting [Paper feed] to
[Auto], set the media type for the
paper tray to [Plain] or
[Recycled].
Check the error message and
remove any jammed paper.
cartridge.
Replace it with a new image drum.
Close all the covers.
Clear the error.
Start copying after the other job is
complete.
Wait until printing is complete.
Wait until the transmission is
complete.
- 155 -
Other Issues
Reference
P.20
-
P.38
P.32
P.32
-
P.32
7
P.36
P.131
P.168
P.169
P.15
P.137
-
-
-