Operator Panel
No.
13
<LEFT> key
14
<RIGHT> key
15
<OK> key
16
<BACK> key
17
<CLEAR> key
18
<POWER SAVE> key
19
<DATA IN MEMORY> indicator
(for MB451/MB451w/MB471/
MB471w/MB491/ES4191 MFP)
20
One-Touch key pad
21
<JOB MACRO> key
(for MB471/MB471w/MB491/ES4191
MFP)
22
Qwerty keyboard
(for MB471/MB471w/MB491/ES4191
MFP)
Default Screen
Turn the power on, and when the machine is
ready for use, the Copy Start screen will be
displayed as the default mode.
You can switch to other functions by using the
main function keys.
Name
Returns to the previous screen.
Shifts the highlighted selection to the left while an item is
Proceeds to the next screen.
Shifts the highlighted selection to the right while an item is
Confirms the highlighted item.
Selects an item to be checked.
Returns to the previous screen.
Executes the following action
Minimizes a setting value.
Enters zero for a setting value.
Clears what is entered.
Cancels a selected item.
Enters or exits the power saving mode.
Exits the sleep mode.
Lights up in green while in the modes.
Lights up when data is in memory.
* Sleep mode does not light up even if there is data in the memory.
Accesses a registered e-mail address or fax number.
8 keys x 2 groups which is 16 entries in total (Press the <SHIFT>
key to switch the groups)
Switches to the job macro screen.
Enters text.
It is under the one-touch key pad.
selected or characters are entered.
selected or characters are entered.
Reference
You can change the default screen by pressing the
<SETTING> key on the operator panel and then selecting
[Admin Setup] > [Management] > [Default Mode].
For details, refer to the User's Manual Advanced.
Entering Text Using the
Operator Panel
When you need to enter text while setting an
item, the entry screen shown below appears.
You can enter upper and lower case letters,
numbers and symbols with the screen keyboard.
Memo
When you need to enter only numbers, the screen
keyboard may not appear. In this case, enter numbers
using the ten-key pad.
- 26 -
Function