Cleaning Your Machine; Cleaning The Surface Of The Machine; Cleaning The Document Glass; Cleaning Document Feeding Rollers In The Adf - Oki MB451wMFP User Manual

Cleaning Your Machine

Cleaning Your Machine

This section explains how to clean each part of your machine.
Cleaning the Surface of the
Machine
Note
 Do not use benzine, thinners, or alcohol as a cleaning
agent. They may damage the plastic parts of the machine.
 Do not lubricate your machine with oil.
Hold down the power switch for about a
1
second to turn on the power.
Reference
"Turning Off Your Machine" (P. 20)

Wipe the surface of the machine with a
2
soft cloth lightly moistened with water or
neutral detergent.
Dry the surface of the machine with a
3
dry soft cloth.

Cleaning the Document Glass

It is recommended to clean the document glass
once a month to maintain image quality of the
printouts.
Note
 Do not use benzine, thinners, or alcohol as a cleaning
agent. They may damage the plastic parts of the machine.
Open the document glass cover.
1
Wipe the document holding pad (1),
2
document glass (2) and ADF document
glass (3) surface with a soft cloth lightly
moistened with water.
1
3
Close the document glass cover.
3
Memo
 If the document glasses surface and the document holding
pad get too dirty, wipe them with a soft cloth lightly
moistened with neutral detergent, and then wipe it again
with a soft cloth lightly moistened with water.
Cleaning Document Feeding
Rollers in the ADF
If the document feeding rollers in the ADF are
contaminated with ink, toner particles or paper
dust, documents and outputs get dirty and a
paper jam may occur. To prevent this, it is
recommended to clean the rollers once a month.
Note
 Do not use benzine, thinners, or alcohol as a cleaning
agent. They may damage the plastic parts of your
machine.
Open the ADF cover.
1
Wipe the document feeding rollers (1),
2
surface of the guide (2), rubber pad (3)
and rubber sheet (4) with a soft cloth
lightly moistened with water.
Wipe the whole surface of the roller while turning
it with your hand.
2
Close the ADF cover.
3
Memo
 If the rollers get too dirty, wipe them with a soft cloth
lightly moistened with neutral detergent, and then wipe it
again with a soft cloth lightly moistened with water.
- 172 -
1
2
3
4