Scan to Network PC
You can send a scanned document to a server on
the network.
The document is scanned and converted to a
PDF, JPEG, TIFF, or XPS file. The factory default
setting is PDF.
Note
Check that the machine is connected to the network.
It is necessary to set up Scan To Network PC in advance.
Reference
For the Scan To Network PC setup, please refer to
Up Scan To Network PC" P.
Press the <SCAN> key on the operator
1
panel.
Place your document with text face up in
2
the ADF or face down on the document
glass.
Press the
to select [Network PC] and
3
then press
.
OK
Check that [Select Profile] is selected
4
and then press
OK
Press the
to select a profile and then
5
press
.
OK
Press
or
6
M
ONO
"Setting
67.
.
.
C
OLOR
Scan to USB Memory
You can save the scanned document in a USB
memory.
Reference
For the specifications of USB memory that you can use, please
refer to
"Print From USB Memory Specifications" P.
Press the <SCAN> key on the operator
1
panel.
Place your document with text face up in
2
the ADF or face down on the document
glass.
Insert the USB memory into the USB
3
memory interface of the machine.
Note
Insert the USB memory into the USB port straight. If it
is not inserted with the correct angle, the USB port
may be damaged.
Press the
4
and then press
Press the
5
necessary.
Press
6
M
ONO
Remove the USB memory from the port
7
after the message is displayed indicating
that it is OK to remove the USB memory.
- 109 -
Scanning Methods
to select [USB Memory]
.
OK
to scanning settings if
or
.
C
OLOR
182.
4