Oki MB451wMFP User Manual page 75

Check that an account is added to
8
[Other Accounts] with the name of C-2,
and close [Accounts].
Create a new folder on the computer
9
with the name entered in C-5.
From the Apple menu, select [System
10
Preferences].
Click [Sharing].
11
Check the checkbox of [Windows
12
Sharing].
Click [Enable Accounts...].
13
Check the checkbox of the account
14
created in step 7.
Enter the value in C-3 in [Password]
15
and click [OK].
Click [Done].
16
Close [Sharing].
17
Proceed to "Creating a Profile for Scan To Network
PC".
Creating a Profile for Scan To
Network PC
Register the information on the Information form
on the computer as a profile. It is necessary to
specify the profile to send data when you
perform Scan To Network PC with the computer.
Press the
1
operator panel.
Press the
2
press .
OK
Press the
3
you want to register and then press
Press the
4
then press
Press to select [Profile Name] and then
5
press the
Enter the information in C-4.
6
Select [Enter] and then press
7
Press the
8
then press
Enter the value of C-1 and C-5 as "\\C-
9
1\C-5".
Example: \\PC1\SalesDev
Note
 If there is no DNS server on the network, you cannot
specify the computer by using the computer name
(C-1). In such a case, you can configure the settings
by using the computer's IP address.
Example: \\192.168.0.3\SalesDev
Memo
 In order to enter the "\" sign while using a QWERTY
keyboard, press <CTRL> and then press <\>.
Select [Enter] and then press
10
Press the
11
then press
- 75 -
Configuring the Network Settings
the <SETTING> key on the
to select [Profile] and then
to select the profile number
to select [Register] and
.
OK
.
OK
to select [Target URL] and
.
OK
to select [User Name] and
.
OK
1
.
OK
.
.