Manage And View The Poe Port Configuration - NETGEAR GSS116E User Manual

If you do not know the IP address of the switch, see Access the Switch Using a Web
Browser on page 7.
The login window opens.
4. Enter the switch's password in the password field.
The switch's default password is password.
The Switch Information page displays.
5. Select System > PoE.
The delivered power is stated in the Output Power (W) column (4.4W for Port 2 in the
previous figure).
Manage and View the PoE Port
Configuration
The GSS108EPP switch provides four PoE+ ports (1–4) that comply with the IEEE 802.3at
standard (PoE+) and are backward compatible with the IEEE 802.3af standard (PoE).
To configure and view the PoE+ port settings:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired network connection, or connect directly to a switch that is
off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Access the Switch Using a Web
Browser on page 7.
The login window opens.
4. Enter the switch's password in the password field.
The switch's default password is password.
The Switch Information page displays.
5. Select System > PoE.
Manage Power over Ethernet
8-Port and 16-Port Gigabit Ethernet Plus Click Switch
65 User Manual