Manage And View The Poe Port Configuration - NETGEAR MS510TX User Manual

Manage and View the PoE Port Configuration

Depending on the model, the switch includes eight PoE+ ports.

To configure and view the PoE+ port settings:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
The login window opens.
4. Enter the switch's password in the Password field.
The default password is password.
The System Information page displays.
5. Select System > PoE > Advanced > PoE Port Configuration.
6. In the Interface column, select the check boxes for the PoE+ ports that you want to
configure or select the check box in the heading to configure the same settings for all eight
PoE+ ports.
7. Configure the settings as described in the following table.
Smart Managed Pro Switches MS510TX and MS510TXPP
Configure System Information
Access the Switch
55
on page 12.