Displaying Igmp Filtering And Throttling Configuration - Cisco 3020 - Catalyst Blade Switch Configuration Manual
Cisco catalyst blade switch 3020 for hp software configuration guide, rel. 12.2(25)sef1
Hide thumbs
Also See for 3020 - Cisco Catalyst Blade Switch:
- Command reference manual (744 pages) ,
- Release note (54 pages) ,
- Getting started manual (37 pages)
Table of Contents
Advertisement
Displaying IGMP Filtering and Throttling Configuration
Command
Step 4
end
Step 5
show running-config interface
interface-id
Step 6
copy running-config startup-config
To return to the default action of dropping the report, use the no ip igmp max-groups action interface
configuration command.
Displaying IGMP Filtering and Throttling Configuration
You can display IGMP profile characteristics, and you can display the IGMP profile and maximum group
configuration for all interfaces on the switch or for a specified interface. You can also display the IGMP
throttling configuration for all interfaces on the switch or for a specified interface.
Use the privileged EXEC commands in
configuration:
Table 18-8
Commands for Displaying IGMP Filtering and Throttling Configuration
Command
show ip igmp profile [profile
number]
show running-config [interface
interface-id]
Cisco Catalyst Blade Switch 3020 for HP Software Configuration Guide
18-28
Purpose
Return to privileged EXEC mode.
Verify the configuration.
(Optional) Save your entries in the configuration file.
Purpose
Displays the specified IGMP profile or all the IGMP profiles defined on the switch.
Displays the configuration of the specified interface or the configuration of all interfaces
on the switch, including (if configured) the maximum number of IGMP groups to which
an interface can belong and the IGMP profile applied to the interface.
Chapter 18
Table 18-8
to display IGMP filtering and throttling
Configuring IGMP Snooping and MVR
OL-8915-01
Advertisement
Table of Contents
Troubleshooting
