Displaying Igmp Filtering And Throttling Configuration - Cisco 2950 - Catalyst Switch Configuration Manual

Chapter 21 Configuring IGMP Snooping and MVR

Displaying IGMP Filtering and Throttling Configuration

You can display IGMP profile characteristics, and you can display the IGMP profile and maximum group
configuration for all interfaces on the switch or for a specified interface. You can also display the IGMP
throttling configuration for all interfaces on the switch or for a specified interface.
Use the privileged EXEC commands in
configuration:
Table 21-8 Commands for Displaying IGMP Filtering and Throttling Configuration
show ip igmp profile [profile
number]
show running-configuration
[interface interface-id]
78-11380-10
Table 21-8
Displays the specified IGMP profile or all the IGMP profiles defined on the switch.
Displays the configuration of the specified interface or the configuration of all interfaces
on the switch, including (if configured) the maximum number of IGMP groups to which
an interface can belong and the IGMP profile applied to the interface.
Catalyst 2950 and Catalyst 2955 Switch Software Configuration Guide
Displaying IGMP Filtering and Throttling Configuration
to display IGMP filtering and throttling
21-27