Displaying Igmp Filtering And Throttling Configuration - Cisco IE-3000-8TC Software Configuration Manual

Displaying IGMP Filtering and Throttling Configuration

Command
Step 4
end
Step 5
show running-config interface
interface-id
Step 6 copy running-config startup-config
To return to the default action of dropping the report, use the no ip igmp max-groups action interface
configuration command.
Displaying IGMP Filtering and Throttling Configuration
You can display IGMP profile characteristics, and you can display the IGMP profile and maximum
group configuration for all interfaces on the switch or for a specified interface. You can also display the
IGMP throttling configuration for all interfaces on the switch or for a specified interface.
Use the privileged EXEC commands in
configuration:
Table 25-8 Commands for Displaying IGMP Filtering and Throttling Configuration
Command
show ip igmp profile [profile
number]
show running-config [interface
interface-id]
Cisco IE 3000 Switch Software Configuration Guide
25-28
Purpose
Return to privileged EXEC mode.
Verify the configuration.
(Optional) Save your entries in the configuration file.
Table 25-8
Purpose
Displays the specified IGMP profile or all the IGMP profiles defined on the switch.
Displays the configuration of the specified interface or the configuration of all interfaces
on the switch, including (if configured) the maximum number of IGMP groups to which
an interface can belong and the IGMP profile applied to the interface.
Chapter 25 Configuring IGMP Snooping and MVR
to display IGMP filtering and throttling
OL-13018-03