Cisco 3020 - Catalyst Blade Switch Configuration Manual page 423

Chapter 20 Configuring CDP
Command
show cdp entry entry-name
[protocol version]
|
show cdp interface [interface-id]
show cdp neighbors [interface-id]
[detail]
show cdp traffic
OL-8915-01
Description
Display information about a specific neighbor.
You can enter an asterisk (*) to display all CDP neighbors, or you can enter the
name of the neighbor about which you want information.
You can also limit the display to information about the protocols enabled on the
specified neighbor or information about the version of software running on the
device.
Display information about interfaces where CDP is enabled.
You can limit the display to the interface about which you want information.
Display information about neighbors, including device type, interface type and
number, holdtime settings, capabilities, platform, and port ID.
You can limit the display to neighbors of a specific interface or expand the display
to provide more detailed information.
Display CDP counters, including the number of packets sent and received and
checksum errors.
Cisco Catalyst Blade Switch 3020 for HP Software Configuration Guide
Monitoring and Maintaining CDP
20-5