Related Publications - Cisco 3020 - Catalyst Blade Switch Configuration Manual

Conventions
Conventions
This publication uses these conventions to convey instructions and information:
Command descriptions use these conventions:
•
•
•
•
•
Interactive examples use these conventions:
•
•
•
Notes, cautions, and timesavers use these conventions and symbols:
Note Means reader take note. Notes contain helpful suggestions or references to materials not contained in
this manual.
Means reader be careful. In this situation, you might do something that could result in equipment
Caution
damage or loss of data.

Related Publications

For more information about the switch, see the Cisco Catalyst Blade Switch 3020 for HP documentation
on Cisco.com.
http://www.cisco.com/en/US/products/ps6748/tsd_products_support_series_home.html
Note Before installing, configuring, or upgrading the switch, see these documents:
•
•
•
Cisco Catalyst Blade Switch 3020 for HP Software Configuration Guide
xxviii
Commands and keywords are in boldface text.
Arguments for which you supply values are in italic.
Square brackets ([ ]) mean optional elements.
Braces ({ }) group required choices, and vertical bars ( | ) separate the alternative elements.
Braces and vertical bars within square brackets ([{ | }]) mean a required choice within an optional
element.
Terminal sessions and system displays are in
Information you enter is in
Nonprinting characters, such as passwords or tabs, are in angle brackets (< >).
For initial configuration information, see the "Configuring the Switch Module"section in the getting
started guide or the "Configuring the Switch with the CLI-Based Setup Program" appendix in the
hardware installation guide.
For device manager requirements, see the "System Requirements" section in the release notes (not
orderable but available on Cisco.com).
For upgrading information, see the "Downloading Software" section in the release notes.
font.
screen
font.
boldface screen
Preface
OL-8915-01