Reconfirming Vlan Memberships; Changing The Reconfirmation Interval - Cisco 3020 - Catalyst Blade Switch Configuration Manual

Configuring VMPS
Beginning in privileged EXEC mode, follow these steps to configure a dynamic-access port on a VMPS
client switch:
Command
Step 1
configure terminal
Step 2 interface interface-id
Step 3 switchport mode access
Step 4 switchport access vlan dynamic
Step 5
end
Step 6 show interfaces interface-id switchport
Step 7 copy running-config startup-config
To return an interface to its default configuration, use the default interface interface-id interface
configuration command. To return an interface to its default switchport mode (dynamic auto), use the no
switchport mode interface configuration command. To reset the access mode to the default VLAN for
the switch, use the no switchport access vlan interface configuration command.

Reconfirming VLAN Memberships

Beginning in privileged EXEC mode, follow these steps to confirm the dynamic-access port VLAN
membership assignments that the switch has received from the VMPS:
Command
Step 1 vmps reconfirm
Step 2 show vmps

Changing the Reconfirmation Interval

VMPS clients periodically reconfirm the VLAN membership information received from the VMPS.You
can set the number of minutes after which reconfirmation occurs.
Beginning in privileged EXEC mode, follow these steps to change the reconfirmation interval:
Command
Step 1 configure terminal
Step 2 vmps reconfirm minutes
Step 3 end
Step 4
show vmps
Step 5 copy running-config startup-config
Cisco Catalyst Blade Switch 3020 for HP Software Configuration Guide
10-28
Purpose
Enter global configuration mode.
Specify the switch port that is connected to the end station, and enter
interface configuration mode.
Set the port to access mode.
Configure the port as eligible for dynamic VLAN membership.
The dynamic-access port must be connected to an end station.
Return to privileged EXEC mode.
Verify your entries in the Operational Mode field of the display.
(Optional) Save your entries in the configuration file.
Purpose
Reconfirm dynamic-access port VLAN membership.
Verify the dynamic VLAN reconfirmation status.
Purpose
Enter global configuration mode.
Enter the number of minutes between reconfirmations of the dynamic
VLAN membership. The range is 1 to 120. The default is 60 minutes.
Return to privileged EXEC mode.
Verify the dynamic VLAN reconfirmation status in the Reconfirm Interval
field of the display.
(Optional) Save your entries in the configuration file.
Chapter 10 Configuring VLANs
OL-8915-01