Using Ftp To Access The Mib Files - Cisco 3020 - Catalyst Blade Switch Configuration Manual

Appendix A Supported MIBs
•
•
•
•
•
•
•
•
•
You can also use this URL for a list of supported MIBs for the Cisco Catalyst Blade Switch 3020 for HP:
Note
ftp://ftp.cisco.com/pub/mibs/supportlists/cbs3020 for HP/cbs3020-supportlist.htm
You can access other information about MIBs and Cisco products on the Cisco web site:
http://www.cisco.com/public/sw-center/netmgmt/cmtk/mibs.shtml

Using FTP to Access the MIB Files

You can get each MIB file by using this procedure:
Step 1 Make sure that your FTP client is in passive mode.
Note
Use FTP to access the server ftp.cisco.com.
Step 2
Log in with the username anonymous.
Step 3
Enter your e-mail username when prompted for the password.
Step 4
At the
Step 5
Use the get MIB_filename command to obtain a copy of the MIB file.
Step 6
OL-8915-01
SNMP-FRAMEWORK-MIB
SNMP-MPD-MIB
SNMP-NOTIFICATION-MIB
SNMP-TARGET-MIB
SNMPv2-MIB
SNMP-VACM-MIB (SNMP-VIEW-BASED-ACM-MIB)
SNMP-USM-MIB (SNMP-USER-BASED-SM-MIB)
TCP-MIB
UDP-MIB
Some FTP clients do not support passive mode.
prompt, change directories to /pub/mibs/v1 and /pub/mibs/v2.
ftp>
Cisco Catalyst Blade Switch 3020 for HP Software Configuration Guide
Using FTP to Access the MIB Files
A-3