Cisco 3020 - Catalyst Blade Switch Configuration Manual page 45

Chapter 1 Overview
NTP is enabled. For more information, see
•
DNS is enabled. For more information, see
•
TACACS+ is disabled. For more information, see
•
Authentication."
RADIUS is disabled. For more information, see
•
Authentication."
The standard HTTP server and Secure Socket Layer (SSL) HTTPS server are both enabled. For more
•
information, see
IEEE 802.1x is disabled. For more information, see
•
Port-Based Authentication."
Port parameters
•
–
–
–
–
No Smartports macros are defined. For more information, see
•
Macros."
VLANs
•
–
–
–
–
–
–
STP, PVST+ is enabled on VLAN 1. For more information, see
•
• MSTP is disabled. For more information, see
Optional spanning-tree features are disabled. For more information, see
•
Optional Spanning-Tree Features."
• Flex Links are not configured. For more information, see
the MAC Address-Table Move Update Feature."
• DHCP snooping is disabled. The DHCP snooping information option is enabled. For more
information, see
IGMP snooping is enabled. No IGMP filters are applied. For more information, see
•
"Configuring IGMP Snooping and MVR."
• IGMP throttling setting is deny. For more information, see
Snooping and MVR."
OL-8915-01
Chapter 6, "Configuring Switch-Based Authentication."
Interface speed and duplex mode is autonegotiate. For more information, see
"Configuring Interface Characteristics."
Auto-MDIX is enabled. For more information, see
Characteristics."
Flow control is off. For more information, see
Characteristics."
PortFast is enabled on the sixteen internal Gigabit Ethernet ports. For more information, see
Chapter 15, "Configuring Optional Spanning-Tree Features."
Default VLAN is VLAN 1. For more information, see
VLAN trunking setting is dynamic auto (DTP). For more information, see
"Configuring VLANs."
Trunk encapsulation is negotiate. For more information, see
VLANs."
VTP mode is server. For more information, see
VTP version is Version 1. For more information, see
Voice VLAN is disabled. For more information, see
Chapter 17, "Configuring DHCP Features."
Default Settings After Initial Switch Configuration
Chapter 5, "Administering the Switch."
Chapter 5, "Administering the Switch."
Chapter 6, "Configuring Switch-Based
Chapter 6, "Configuring Switch-Based
Chapter 7, "Configuring IEEE 802.1x
Chapter 8, "Configuring Interface
Chapter 8, "Configuring Interface
Chapter 11, "Configuring VTP."
Chapter 14, "Configuring MSTP."
Cisco Catalyst Blade Switch 3020 for HP Software Configuration Guide
Chapter 8,
Chapter 9, "Configuring Smartports
Chapter 10, "Configuring VLANs."
Chapter 10,
Chapter 10, "Configuring
Chapter 11, "Configuring VTP."
Chapter 12, "Configuring Voice VLAN."
Chapter 13, "Configuring STP."
Chapter 15, "Configuring
Chapter 16, "Configuring Flex Links and
Chapter 18, "Configuring IGMP
Chapter 18,
1-9