Configuring Ieee 802.1X Authentication - Cisco 3020 - Catalyst Blade Switch Configuration Manual

Configuring IEEE 802.1x Authentication

MAC authentication bypass interacts with the features:
•
•
•
•
•
•
•
Configuring IEEE 802.1x Authentication
These sections contain this configuration information:
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Cisco Catalyst Blade Switch 3020 for HP Software Configuration Guide
7-18
IEEE 802.1x authentication-You can enable MAC authentication bypass only if IEEE 802.1x
authentication is enabled on the port.
Guest VLAN-If a client has an invalid MAC address identity, the switch assigns the client to a
guest VLAN if one is configured.
Restricted VLAN-This feature is not supported when the client connected to an IEEE 802.lx port
is authenticated with MAC authentication bypass.
Port security-See the "Using IEEE 802.1x Authentication with Port Security" section on
page 7-15.
Voice VLAN-See the "Using IEEE 802.1x Authentication with Voice VLAN Ports" section on
page 7-15.
VLAN Membership Policy Server (VMPS)-IEEE802.1x and VMPS are mutually exclusive.
Private VLAN-You can assign a client to a private VLAN.
Default IEEE 802.1x Authentication Configuration, page 7-19
IEEE 802.1x Authentication Configuration Guidelines, page 7-20
Configuring IEEE 802.1x Authentication, page 7-22
Configuring the Switch-to-RADIUS-Server Communication, page 7-23
Configuring the Host Mode, page 7-25
Configuring Periodic Re-Authentication, page 7-25
Manually Re-Authenticating a Client Connected to a Port, page 7-26
Changing the Quiet Period, page 7-26
Changing the Switch-to-Client Retransmission Time, page 7-27
Setting the Switch-to-Client Frame-Retransmission Number, page 7-28
Setting the Re-Authentication Number, page 7-29
Configuring IEEE 802.1x Accounting, page 7-29
Configuring a Guest VLAN, page 7-30
Configuring a Restricted VLAN, page 7-31
Configuring the Inaccessible Authentication Bypass Feature, page 7-33
Configuring IEEE 802.1x Authentication with WoL, page 7-35
Configuring MAC Authentication Bypass, page 7-36
"Configuring IEEE 802.1x Authentication Using a RADIUS Server" section on page 7-37
Disabling IEEE 802.1x Authentication on the Port, page 7-38
Resetting the IEEE 802.1x Authentication Configuration to the Default Values, page 7-38
Chapter 7 Configuring IEEE 802.1x Port-Based Authentication
(required)
(optional)
(optional)
(optional)
(optional)
(optional)
(optional)
(optional)
(optional)
(optional)
(optional)
(optional)
(required)
(optional)
(optional)
(optional)
(optional)
(optional)
OL-8915-01