Display Assembly - Toshiba Libretto 100CT User Manual

4.5

Display Assembly

Removing the Display Assembly
To remove the display assembly follow the steps below. (See figures 4-8 to 4 -11.)
1. Lift out the metal cover.
CAUTION: The metal cover is thin, so be careful not to cut yourself on the edge.
2. Disconnect the display flexible cable from PJ250 on the system board.
3. Remove insulator covering the RTC battery cable and lift the battery cable out of its
groove.
Figure 4-8 Removing the metal cover
File No. 960-140
4-13