Toshiba Libretto 100CT User Manual page 146

10. PCI Bus
This option displays the interrupt request level for the CardBus in the computer. It is
for information only and cannot be changed.
11. PC Card
This option lets you set the PC Card Controller mode.
Auto-Selected
Card Bus/16 bit
PCIC Compatible
12. Drives I/O
This item display the installed hard disk drives: Built-in HDD or no drive. It appears
only in TSETUP.
Setting for Built-in HDD
Primary IDE (1F0H/IRQ14)
Not Used
Use this setting for all PC Card if you are using
Windows 95. (Default)
If the card does not work properly with the Auto-
Selected setting, use this setting for Card Bus PC card.
If the card does not work properly with the Auto-
Selected and CardBus/16 bit setting, use this setting for
16-bit PC Card.
The built-in HDD is ready for use.
Disables the built-in HDD.
File No. 960-140
3-71