File No. 960-140
4.8
Display Mask
Removing the Display Mask
To remove the display mask follow the steps below. (See figures 4-16 to 4 -17.)
1. Remove the two mask seals on the right and left in the lower part of the display mask.
2. Remove two M2.5x5 screws that were covered by the seals.
3. Remove the AccuPoint cap.
4. Carefully insert your fingers between the mask and top of the LCD panel and release
the four latches at the top of the display mask.
4-20
Figure 4-16 Removing the mask seals