File No. 960-140
4.9
FL Inverter Board
Removing the FL Inverter Board
To remove the FL inverter board follow the steps below. (See figures 4-18 to 4-19.)
1. Remove one M2x5 silver screw securing the FL inverter board.
2. Slide the FL inverter board slightly to the right to clear a small latch and lift out the
board, being careful not to apply tension to the cables.
3. Carefully turn the FL inverter board over and disconnect the display cable from CN1
and the FL cable from CN2.
4-22
Figure 4-18 Removing the FL inverter board