Toshiba Libretto 100CT User Manual page 127

File No. 960-140
3. COPY program
(a) When COPY is selected, the following message appears:
FLOPPY DISK FORMAT &
Type select (0:2DD ,3:2HD) ?
(b) Selecting a media/drive type number will display a message similar to the one
below:
Insert source disk into drive A:
Press any key when ready.
(c) Remove the Diagnostics Disk from the FDD, insert the source disk and press
any key. The following message will appear, indicating the program has
started.
[ FDD TYPE ] : TRACK = XXX
[ FDD TYPE ] : HEAD
[ FDD TYPE ] : SECTOR = XX
Copy start
(d) Remove the source disk from the FDD, insert a formatted work disk and press
any key. The [[ track, head = XXX X ]] message will appear and start copying
to the target disk. When the amount of data is too large to be copied in one
operation, the message from step (b) displays again. After the floppy disk has
been copied, the following message will appear:
Copy complete
Another copy (1:Yes/2:No
(e) To copy another disk, type 1 and the message from step (a) displays again.
Entering 2 returns the test program to the DIAGNOSTIC MENU.
3-52
COPY : VX.XX
= X
[[ track,head = XXX X ]]
) ?