Hdd Troubleshooting; Procedure 1 Message Check - Toshiba Libretto 100CT User Manual

File No. 960-140
1.6

HDD Troubleshooting

This section describes how to determine if the HDD is functioning properly. Perform the steps
below starting with Procedure 1 and continuing with the other procedures as required.
Procedure 1: Message Check
Procedure 2: Partition Check
Procedure 3: Format Check
Procedure 4: Diagnostic Test Program Execution Check
Procedure 5: Connector Check and Replacement Check
NOTE: The contents of the hard disk will be erased when the HDD troubleshooting
procedures are executed. Transfer the contents of the hard disk to floppy disk or other
device. If the customer has not or cannot perform the backup, create backup disks as
described below.
Check to see if the Microsoft Create System Disks Tools (MSCSD.EXE) still exists
in the System Tools Folder. (This tool can be used only once.) If it exists, use it to
back up the preinstalled software, then use the Backup utility in the System Tools
folder to back up the entire disk, including the user's files.
Refer to the operating system instructions.
1-28