Display Assembly - Toshiba Satellite P10 Series Maintenance Manual

4 Replacement Procedures

4.12 Display Assembly

Removing the Display Assembly
To remove the display assembly, first remove the battery pack, keyboard, and wireless LAN
module, then follow the steps below.
1. Remove one M2.5.x3 black screw securing each hinge cover.
2. Disconnect the LCD power cable from the top chassis.
3. Remove one M2x6 black screw securing LCD display cable then unplug the cable.
4. Pull the wireless LAN module's antennae wires through the small hole beside the LCD
display cable connector.
Figure 4-19 Removing the wireless LAN compartment cover
5. Remove two M2.5x6 black screws from each hinge and two black M2.5x6 black
screws from the computer's back side (help hold the display assembly in place).
6. Lift the display assembly from the computer's chassis.
4-36
4.12 Display Assembly
Satellite P10 Series Maintenance Manual