File No. 960-140
Table 2-3 Printer port LED boot mode status (5/5)
LED Status
A0h
Boot password
C0h
External I/O check
A6h
BIOS information update
FEh
System ROM check
FFh
End
Check 1
If any of the following error codes display, go to Procedure 5.
B0h, B2h, B3h, 00h, 01h, 05h, 06h, 03h, 04h, 02h, 71h, 07h, 73h, 74h, 72h, 76h,
79h, 77h, 78h, 81h, 82h, 7Bh, 7Ch, 7Ah, 08h, 09h, 0Dh, 19h, 1Fh, 20h, 21h, 25h,
30h, 40h, 41h, 42h, 70h, 80h, A0h, C0h, A6h, FEh
Check 2
If error code 83h is displayed, go to the following sections:
Section 2.5.
Section 2.6.
1-22
Test item
Boot password
External I/O check
Set font address
Set shadow RAM size
Set expansion memory size to CMOS
System resource update
Set extended memory size to runtime BIOS for
INT15h
ACPI table update
Set SCT area to runtime BIOS
Set battery save mode
Send date to PS microprocessor
Close PCI device configuration area
Protect system BIOS
Cache control
System ROM check
FDD Troubleshooting
HDD Troubleshooting
Message