5. Turn the system board over and lift off the PC card slot.
Installing System Board, Heat Sink and PC Card Slot
To install the system board, heat sink and PC card slot follow the steps below. (See figures 4-
13 to 4-15.)
1. Secure the heat sink to the system board with one M2x4 screw, and two M2x6
screws.
2. Turn over the system board and set the PC card slot in place. Turn the system board
back over and secure the PC card slot with four 2x14 silver screws.
3. Align the power connector with its housing and seat the system board.
Figure 4-14 Removing the heat sink
Figure 4-15 Removing the PC card slot
File No. 960-140
4-19