Toshiba Libretto 100CT User Manual page 182

File No. 960-140
Installing the Speaker, Power Switch Board and AccuPoint Board
To install the speaker, power switch board and AccuPoint board follow the steps below. (See
figures 4-21 to 4-23.)
1. Seat the AccuPoint board and secure it with one M2x3 silver screw.
2. Connect the LCD flexible cable to PJ3 on the power switch board.
3. Connect the AccuPoint flexible cable to PJ12 on the power switch board.
4. Seat the speaker in its case.
5. Connect the speaker cable to the speaker connector and seat the speaker with its
rubber case.
6. Install the removed components.
4-30