System Test - Toshiba Libretto 100CT User Manual

3.4

System Test

To execute the System Test select 1 from the DIAGNOSTIC TEST MENU, press Enter and
follow the directions on the screen. Move the highlight bar to the subtest you want to execute
and press Enter.
Subtest 01 ROM Checksum
This subtest executes a checksum test of the BIOS ROM on the system board.
Subtest 05 Thermistor Check
This subtest reads the thermistor connect check status of the power supply
microprocessor, then compares it with the original data. If the data indicates
the connector is open or shorted, it displays an error message.
Subtest 06 Quick Charge
This subtest determines whether the battery pack can be quick charged. Refer
to the table listing the result codes in Chapter 2.
File No. 960-140
3-9