Toshiba Libretto 100CT User Manual page 160

2. Pull the HDD bracket straight with your fingernail and pull the HDD out.
NOTE: When pulling the HDD out, be sure to hold both corners of the bracket as shown
below so as not to bend the bracket.
3. Remove two thin-flat-head M3 screws from the HDD bracket, and separate the
bracket and the HDD.
Installing the HDD
To install the HDD follow the steps below. (See figures 4-1 to 4-3.)
1. Secure the HDD bracket to the HDD with two flat-head M3 screws.
2. Insert the HDD into the HDD slot and push it carefully and securely into place.
Figure 4-2 Removing the HDD
Figure 4-3 Removing the HDD bracket
File No. 960-140
4-9