4.6
RTC Battery
Removing the RTC Battery
To remove the RTC battery follow the steps below. (See figure 4-12.)
1. Disconnect the RTC battery cable from PJ300 on the system board.
2. Lift out the RTC battery.
Installing the RTC Battery
To install the RTC battery follow the steps below. (See figure 4-12.)
1. Connect the RTC battery cable to PJ300 on the system board.
2. Seat the RTC battery.
3. Install the removed components.
Figure 4-12 RTC battery removal
File No. 960-140
4-17