Floppy Disk Test - Toshiba Libretto 100CT User Manual

File No. 960-140
3.8

Floppy Disk Test

NOTE: Before running the floppy disk test, prepare a formatted work disk. Remove the
Diagnostics Disk and insert the work disk into the FDD. The contents of the floppy disk
will be erased.
To execute the Floppy Disk Test, select 5 from the DIAGNOSTIC TEST MENU, press
Enter and follow the directions displayed on the screen. The Floppy Disk test contains five
subtests that test the FDD. The following messages will appear after selecting the Floppy Disk
Test from the DIAGNOSTIC TEST MENU . Answer each question with an appropriate
response to execute the test.
1. Select the test drive number of the floppy disk drive to be tested and press Enter.
Test drive number select (1:FDD#1,2:FDD#2,0:FDD1&2
2. Select the media type of the floppy disk in the test drive to be tested, and press Enter.
Media in drive #X mode (0:2DD
3. Select the track you want the test to start on and press Enter.
Test start track (Enter
4. The floppy disk test menu will appear after you select. Select the number of the subtest
you want to execute and press Enter. The following message will appear during the
floppy disk test.
3-20
,1:2D,2:2D-2HD/2DD,3:2HD) ?
:0/dd:00-79) ?
) ?