Overview - Toshiba Libretto 100CT User Manual

4.1

Overview

The disassembly and replacement procedures for units that can be replaced in the field (FRUs)
are described in this section. It may not be necessary to remove all the FRUs in order to
replace one FRU. The chart below shows a guideline on which FRUs are to be removed
before removing a certain FRU. Be sure to remove the battery pack first. In repairing an FRU
suspected to be the cause of a computer malfunction, determine FRUs to be removed
according to the flow of the chart below.
The example at the right
shows FRUs to be removed
for the display assembly and
for the FL inverter board.
The display assembly is
overlapped by the keyboard,
which is overlapped by the
optional memory module,
HDD and battery
pack/optional PC card. The
FL inverter board is
overlapped by the display
mask and battery
pack/optional PC card.
File No. 960-140
4-1