4.19 Display Assembly
4.19 Display Assembly
Removing the Display Assembly
CAUTION:
Use care to avoid the antenna cable being caught between the display assembly and the
laptop.
Remove the display assembly according to the following procedures and Figure 4.35.
1. Pull out the four antenna cables from the routing channel on the logic lower assembly.
2. Remove the four M2.5x4 screws securing the display assembly.
3. Remove the display assembly from the logic lower assembly.
M2.5x4*4
Satellite M600/M640/M645/M647 Maintenance Manual
Figure 4.35 Removing the display assembly
4 Replacement Procedures
4-51