Procedure 1 - Toshiba Libretto 100CT User Manual

Procedure 1

Message Check
When the computer's HDD does not function properly, some of the following error messages
may appear on the display. Start with Check 1 below and perform the other checks as
instructed.
Check 1 If any of the following messages appear, go to Procedure 5. If the following
messages do not appear, perform Check 2.
HDC ERROR (After 5 seconds this message will disappear.)
HDD #0 ERROR (After 5 seconds this message will disappear.)
HDD #1 ERROR (After 5 seconds this message will disappear.)
Check 2 If either of the following messages appears, go to Procedure 2. If the following
messages do not appear, perform Check 3.
Insert system disk in drive
Press any key when
Non-System disk or disk error
Replace and press any key
Check 3 Check TSETUP to see whether the Hard Disk option is set to Not used. If it is set
to Not used, choose another setting and restart the computer. If the problem still
exists, go to Procedure 2.
or
or
ready .....
or
File No. 960-140
1-29