Table of Contents
Advertisement
64
Installing ServiceDesk
Installing Workflow Designer on a client computer
Installing Workflow Designer on a client computer
(Advanced Settings only) Specify where to store workflow details such as
task assignments and deadlines.
See
"Workflow Persistence page"
Symbus ORM Settings page
(Advanced Settings only) Configure the settings that specify how to enable
communications between the Process Manager database and the workflow
details.
The workflow details include data such as task assignments and deadlines.
See
"Symbus ORM page"
System Check page
Review the results of the system checks that the ServiceDesk installation
performs. You can view descriptions of any warnings and failures and you
can also save those descriptions to a log file.
See
"System Check page"
8
On the Ready to Install page, review all the installation settings that you
entered, and then take one of the following actions:
If the settings are
correct
If any of the settings are
not correct
9
On the Installing page, you can view the installation s status.
To see the installation status in detail, click Details.
10
When the installation finishes, on the Installing page, click Next to start the
configuration segment of the wizard.
See
"Configuring the ServiceDesk application software during installation"
on page 88.
You can install Workflow Designer at the same time and on the same computer
as ServiceDesk. However, Workflow Designer is typically installed on a client
computer instead of the ServiceDesk server computer. This procedure helps you
install Workflow Designer separately.
This task is an optional step in the process for installing ServiceDesk.
on page 83.
on page 83.
on page 85.
Click Install.
Click Back to back up through the setup wizard and change
them.
Advertisement
Table of Contents
