Viewing Assigned Computers; Moving A Client Computer To Another Group; Guidelines For Managing Portable Computers - Symantec 20032623 - Endpoint Protection Small Business Edition Implementation Manual

Viewing assigned computers

Moving a client computer to another group

Guidelines for managing portable computers

3 In the Group Properties for group name dialog box, click Block New Clients.
4 Click OK.
You can verify that your computers are assigned to the correct groups.
To view assigned computers
1 In the console, click Computers.
2 On the Computers page, on the Computers tab, click a group.
See Managing groups of computers"
If your client computers are not in the correct group, you can move them to another
group.
To move a client computer to another group
1
In the console, click Computers.
2
On the Computers page, on the Computers tab, select a group.
3 On the Computers tab, in the selected group, select the computer, and then
right-click Move.
Use the Shift key or the Control key to select multiple computers.
4
In the Move Clients dialog box, select the new group.
5
Click OK.
See Managing groups of computers"
A portable computer is a laptop computer or notebook computer that moves
physically from one location to another. A portable computer might connect to
your network intermittently or not at all. A portable computer might connect to
your network through a virtual private network (VPN), a wireless network, or
both.
See Planning the installation"
Consider the following best practices for managing portable computers:
Install the portable computers as managed computers.
Managing groups of client computers
on page 101.
on page 101.
on page 35.
Viewing assigned computers
105